DUKE D80 COMBINATION BLASTING MACHINE WITH CIRCUIT CHECKER

The Duke D80 Combination Blasting Machine With Circuit Checker gives you the ability to Dual or Single Prime shock tube and fire electric, so you're always ready regardless of what you're shooting. The ONLY Non-Nuclear Munitions Safety Board Certified Firing Circuit!

• Size 5.875 inches or 14.93cm tall by 2.25 inches or 5.715 cm thick by 2.625 inches or 6.6675 cm wide.
  
• Fits in the palm of your hand or your shirt pocket
  
• Weight: 10 oz. (0.3 kg)
  
• Power Supply: One standard 9-Volt alkaline battery
  
• Electric Output: 8 Joules at 320 Volts into 172 ohm load
  
• (80 2-ohm caps through a 12-ohm lead line)
  
• Shock Tube Tip: Fires both military and commercial shock tube
  
• Carbon block technology
  
• One active and three spare blocks built into tip for long life
  
• Replacement carbon blocks available
  
• Environmentally Sealed: Submersible to 10 feet (3m)
  
• Switches are double sealed and protected by a metal shroud
  
• Main electronics are gasket sealed
  
• Safety: Blasting machine will not fire until fully charged to design voltage. Outputs are caged until unit is fired. Unit automatically discharges safely if ARM button is released. Two button fire control with shrouded switches to prevent accidental actuation.
  
• Fast Charge: 4~5 seconds
  
• Long Battery Life: Provides over 200 charge-fire cycles
  
• Military Rated: Pending. Unit is designed to comply with HESD, environmental hazards, and non-nuclear munitions fuzing safety standards.
  
• Temperature Range: -40C ~ +85C
  
• Colors: Desert Tan